Current location：front page >> Product Center >> Impact testing machine series >> Non-metallic material impact test machine

XJJ-5 simple supporting beam impact test machine

Product Classification： Non-metallic material impact test machine

Product Overview：The main technical parameters of the XJJ-5 simple supporting beam impact tester are fully in line with ISO 179, GB/T 1043, GB/T 2612, JB/T 8762, and GB4742 standards. Replace different energy impact pendulums and adjust the jaw seat to perform various impact tests. This machine is a detection instrument with reasonable structure, beautiful shape, convenient operation and accurate data. It is widel

XJJ-5 simple supporting beam impact test machine

Product Description:

The main technical parameters of the XJJ-5 simple supporting beam impact tester are fully in line with ISO 179, GB/T 1043, GB/T 2612, JB/T 8762, and GB4742 standards. Replace different energy impact pendulums and adjust the jaw seat to perform various impact tests. This machine is a detection instrument with reasonable structure, beautiful shape, convenient operation and accurate data. It is widely used in hard plastics, fiberglass, reinforced nylon and other fields.

Technical parameters: (The above parameters are for reference only, and the detailed parameters are mainly real equipment)

1. The pendulum energy, pendulum torque, and dial small index values are as follows:

Pendulum energy	1J	2J	4J	5J
Pendulum torque	0.516Nm	1.031Nm	2.062Nm	2.578Nm
Small index value of the scale disc	0.01J	0.02J	0.04J	0.05J

2. Impact speed: 2.9m/s

3. Pre-raised angle of pendulum: 160°

4. The distance from the center of the swing shaft to the center of the sample: 221mm

5. Claw rounded corner radius: 1mm

6. Impact blade angle: 30°

7. Impact blade rounded corner radius: 2mm

Sample Type	Length L	Width b	Thickness d	Distance between support lines
1	80±2	10±0.5	4±0.2	60
2	50±1	6±0.2	4±0.2	40
3	120±2	15±0.5	10±0.5	70
4	125±2	13±0.5	13±0.5	95

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Previous article：Bolt and nut test fixture
Next article：XJJ-50 series simple supporting beam impact test machine

Recommended informationNEWS

[2022-08-26]Do you know how important the configuration of the universal tensile test machine is? The configuration of the universal tensile test machine
[2022-08-26]Introduction to the functions of the repeated bending test machine of metal material
[2022-08-26]How to use the universal tensile testing machine?
[2022-08-26]What are the key points of the lateral deformation test of electronic universal testing machines?
[2022-08-12]Testing method of metal rods by testing machine
[2022-08-12]Electronic universal testing machine-Plastic film tensile testing machine
[2022-08-04]How to install a clamp to save effort
[2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
[2022-08-04]Tension machine
[2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
[2022-07-29]In practical applications, friction between parts is inevitable.
[2022-07-29]Methods to avoid positioning errors of electronic universal test machines
[2022-07-29]What errors are prone to occur when using the fatigue test machine
[2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
[2022-07-20]What are the safety and service life of the woven bag tensile tester?
[2022-07-20]Several categories of tension machine sensors
[2022-07-20]Calibration of universal testing machine sensor
[2022-07-20]Introduction to technical problems of material tensile testing machine