Introduction to the difference between single-column tensile tester and gantry tensile machine

forTension testerThere are also many information about this. Do you know what are the differences between single-column and gantry tensile testing machines? The following is Jinan Hengsi Shanda Instrument Co., Ltd. to learn more about it.

Commonly used electromechanical devices have load capacity ranging from tens to hundreds of thousands of Newtons. The larger the specification, the higher the cost. Whether it is single-column or door-type, the commonly used instrument for testing plastics is the vertical table top device. The same principle applies to horizontal instruments, which are mainly used in automated processes that continuously process samples are processed using robots. Vertical instruments take up less space and are easier to operate.

Single-column electronicsTension testerIt has a lower level of stress and a lower cost. They have a load capacity of 5000 Newtons. The rack load capacity of the gantry electronic tension tester can reach 5000 to 1000,000 Newtons. The load unit is also classified for a certain force, which should be suitable for the electronic tensile tester frame and the sample. The capacity of the load unit should not exceed the estimated fracture load of the specimen, otherwise it will damage the measurement accuracy. By weight, you need to use a balance to test something that costs several grams, and you need to use a scale to test something that costs tens of kilograms. If you use a scale to test something that costs several grams, the error will be several times, and the meaning of the test will be lost.

The instrument that is commonly used in plastic testing is a single column electronic tensile tester with rack load capacity of 1000 to 5000 Newtons. For fill and reinforced plastics, instruments with rack load capacity of 20,000 Newtons are often required.

MoreMaterial testing machineAll information is in Jinan Hengsi Shanda Instrument Co., Ltd.