5-step operation of shock test mechanism cooling

Impact testing machineIncluding equipment and instruments such as impact sample low temperature tanks, impact test notch pulling beds, and the following are the operating principles of the impact test mechanism cooling system.

1. The working principle of the cooling of the low-temperature shock test mechanism: Both high and low refrigeration cycles adopt the reverse card cycle. This cycle consists of two isothermal processes and two adiabatic processes. The process is as follows: the refrigerant is compressed to a higher pressure through the compressor, which consumes work to increase the exhaust temperature. Then the refrigerant isothermal exchanged with the surrounding medium through the condenser to transfer heat to the surrounding medium. After the refrigerant is insulated and expanded through the shutoff valve to perform work, and the temperature of the refrigerant decreases. This cycle repeats itself to achieve the purpose of cooling down.

2. Low temperatureImpact testing machineRefrigeration system and compressor: In order to ensure the cooling rate and temperature requirements of the test chamber of the impact test machine, this hot and cold impact test chamber adopts a binary composite Freon refrigeration system composed of imported semi-enclosed compressors. The stacked system includes a high-pressure refrigeration cycle and a low-pressure refrigeration cycle, and the connected container is an evaporation condenser. The function of the evaporation condenser is to use the low-pressure circulating evaporator as a high-pressure circulating condenser.

The design of the refrigeration system uses energy regulation technology. An effective treatment method can not only ensure that the energy consumption and cooling capacity of the refrigeration system can be effectively adjusted under the normal operation of the refrigeration unit, but also reduce the operating costs and faults of the refrigeration system to a relatively economical state.

3. Cooling method: air-cooled or water-cooled.

4. Refrigerant: Use R404A (low pressure cycle) and R23 (high pressure cycle) environmentally friendly refrigerants produced by DUPONT, the United States.

5. Refrigeration auxiliary parts: The main refrigeration accessories and control devices are imported originals, American SPORLAN thermal expansion valve Italian CASTEI solenoid valve; American RANCO pressure controller, oil pressure controller, American PACKLESS shock absorber hose, European and American AC&R Shantou separator, Italian CASTEL shutoff valve, American SPORLAN filter, etc.

More materialsTesting machineAll consultations are available at Jinan Hengsi Shanda Instrument Co., Ltd.