Hello, welcome to visitJinan Hengsi Shanda Instrument Co., Ltd.
English en
Some of you are interested in：
Current location：front page >> Product Center >> Pressure tester series >> Fully automatic pressure tester

Microcomputer controlled full closed loop pressure tester 300KN

Microcomputer controlled full closed loop pressure tester 300KN

Microcomputer controlled full closed loop pressure tester 300KN

Product Classification： Fully automatic pressure tester
Product Overview：The functional use of the microcomputer-controlled constant stress pressure tester 300KN is mainly used for the compressive strength test of cement sand, carbon materials, petroleum proppants and other materials. It can also be used for the mechanical properties of other materials, and meets the requirements of GB/T2611, GB/T17671, GB/T16826, GB/T50081 standards.

1. Functional use of 300KN, a microcomputer controlled constant stress pressure tester

This machine is mainly used for compressive strength tests of cement sand, carbon materials, petroleum proppants and other materials, and can also be used for mechanical properties tests of other materials, complying with the requirements of GB/T2611, GB/T17671, GB/T16826, GB/T50081 standards.

two,Microcomputer controlled constant stress pressure tester 300KNProduct DescriptionDescription

The test machine uses a high-performance AC servo motor to drive the precision lead screw operation. The high-performance control system can realize automatic control and arbitrary programming control in various modes such as constant-rate stress, constant-rate displacement, and constant-speed deformation;

The test machine host uses a down-mounted host, which makes the sample clamping quick. The whole machine has high strength and good fatigue resistance;

Since the AC servo motor loading does not overheat, it can meet the working requirements of 7×24 hours safety protection device:

3. Technical parameters of 300KN of the microcomputer controlled constant stress pressure tester

(one)Host parameters:

Testing force: 300KN;

Host structure: floor-standing model;

Maximum compression space (mm): 200;

Space adjustment method: ball screw adjustment;

Effective spans on the left and right: 210mm;

Pressure plate stroke: 80mm;

Upload plate size (mm): φ120;

Down pressure plate size (mm): φ160;

Speed ​​parameters (mm/min): 80;

(II) The whole machine parameters:

Host size (mm): 1120*480*1260;

The weight of the whole machine (kg): 300;

Supply voltage: single-phase 220v/50HZ ~60HZ


Recommended informationNEWS

Friendly links：
Testing machine