Analysis of 3 daily problems of Hengsi Electronic Universal Testing Machine

electronicUniversal testing machineThere will be some minor problems in the test work. Our company’s engineers have summarized the following three minor problems and operating methods based on experience. We hope that customers can learn from it.

1. The power supply of the test machine host is not illuminated and the device cannot move up and down.

Troubleshooting method:

Check whether the power supply line connected to the test machine is normally connected; check whether the emergency stop switch is in a screw-up state; check whether the power supply voltage of the test machine is normal; check whether the fuse on the machine socket is blown, please remove the spare fuse and install it.

2. After the computer software is online, the message appears to be overloaded.

Troubleshooting method:

Check the computer withUniversal testing machinewhether the communication line of the communication line is off; check whether the online selection sensor is selected correctly; check whether the sensor has been hit during the near test or operating the keyboard; check whether the software's calibration or calibration function was used before a problem occurs; check whether the calibration value, calibration value or other information in the hardware parameters have been manually changed.

3. The power supply of the test machine host is powered, and the equipment cannot move up and down.

Troubleshooting method:

Check whether the equipment cannot move after 15S, because the host needs to be self-checked, which takes about 15S time; check whether the upper and lower limits are in the right position and have a certain operating space; check whether the power supply voltage connected to the test machine is normal.

MoreTesting machineTechnical articles are all available at: Jinan Hengsi Shanda Instrument Network