7-step instructions for film tensile testing machine

filmTension testerBefore purchasing, you should consider many issues such as price, after-sales service, test accuracy, etc., but you should also pay attention to the operation after purchasing. The following are detailed steps for operating the control panel of the film tensile tester, hoping to help users understand this requirement.

1. Pull and press: Press this key to adjust the test direction, and the indicator light displays the current tensile and compression test status.

2. Calibration: After pressing the calibration key, you can use the up and down arrows to adjust the displayed force value to reduce the error with the actual force value, and meet the required indicators. Then press this key to save. (For annual appraisal, do not move it casually)

3. Up and down arrows: In the calibration state, press the up and down arrow keys to adjust the force value.

4. Clear: Clear load.

5. Gear position: Switch range.

6. Peak value: Press this key to switch to peak state; the peak indicator light is on, displaying the peak value of this test.

Press this key. The peak indicator light is off, and the display switches to normal state, and clears the peak value at the same time.

7. Reset: If the tension test machine is abnormal, please press this key to reset and start over.

MoreTension testerTechnical information is available in Jinan Hengsi Shanda Instrument Co., Ltd.