12 steps to master the operation of the tensile tester

Tension testerIt is a commonly used mechanical testing equipment. Some unfamiliar testers are unpredictable about the use of tensile testing machines. The following are detailed explanations of the detailed steps taken by our company's technicians to operate the tensile testing machines:

1. It is strictly forbidden to use machines with overload and overspeed regulations.

2. It is strictly forbidden to collide with the lifting screw and lubricating oil is applied on time.

3. When replacing the triangle belt mechanically, pay attention to the position of the hand to prevent clamping the fingers. The transmission part must be covered with a protective cover.

4. When adjusting the lifting speed with electronic speed control, do not operate too quickly.

5. Before using the 50KN power machine, pay attention to check the tightening of the clamp lifting screws.

6.Tension testerWhen lifting the fixture up and down, the movement should be smooth to avoid collisions. Check the tightness of the fixture screws frequently.

7. When replacing the test fixture, pay attention to cooperation to prevent damage.

8. When opening the fixture to pick up the sample, pay attention to the clipping distance of the sample, and do not be too much or too little.

9. When connecting the tensile tester and the microcomputer, it must operate according to the program requirements. It is strictly forbidden to cause disorder in the program if illegal operations are caused;

10. Check whether the parameters to be printed before printing, check whether the printer has paper and replenish it in time.

11. After the operation is completed, turn off the machine according to the program requirements. It is strictly forbidden to directly cut off the power supply.

12. Strictly implement the annual inspection system and the national metrology and appraisal agency shall conduct parameter identification and certification regularly.

More AboutTension testerAll operations are available at Jinan Hengsi Shanda Instrument Co., Ltd.