Current location：front page >> Product Center >> Impact testing machine series >> Non-metallic material impact test machine
XJU series cantilever beam impact test machine
XJU series cantilever beam impact test machine
Product Classification： Non-metallic material impact test machine
Product Overview：Suitable for the determination of impact toughness of non-metallic materials such as hard plastics, reinforced nylon, fiberglass, ceramics, cast stones, electrically insulating materials. This machine is a detection instrument with reasonable structure, beautiful shape, convenient operation and accurate data. Cantilever beam impact full energy or any combination of any energy can be achieved.
The product as shown in the figure is produced by Jinan Hengsi Shanda Instrument Co., Ltd.Cantilever beam impact test machine, The following is the detailed information of the cantilever beam impact test machine we introduced to you. If you are interested in this product, please call us for consultation
1. Functional uses
The cantilever beam impact testing machine is suitable for the determination of impact toughness of non-metallic materials such as plastic pipes, plates, profiles, engineering plastics, fiberglass, ceramics, castings, electrically insulating materials. The product complies with the standards and requirements of ISO179, ISO180, GB/T1043, GB/T1843, GB/T13525, etc.
2. Technical parameters
Product Name | Cantilever beam impact test machine | |||
Product model | XJU-5.5 | XJU-22 | XJUD-5.5 | XJUD-22 |
Shock Energy (J) | 1, 2.75, 5.5 | 11, 22 | 1, 2.75, 5.5 | 11, 22 |
Shock speed | 3.5m/s | |||
Display method | Dial hand | Digital Explanation | ||
Pendulum elevation angle | 150° | |||
Dial pointer dial index value: 1/220 of impact energy; the dial is divided into fixed dials and rotatable digital dials. The outer layer on the dial is angled, the middle layer is a simple-supported beam scale, and the inner layer is a cantilever beam scale.
3. Performance indicators
The digital explicit cantilever beam impact test machine has the functions of angle measurement and zeroing, energy loss measurement and automatic compensation, automatic calculation of impact strength, standard deviation and other functions.
The cantilever beam jaws adopt wedge-shaped self-clip jaws, easy to clamp and quick clamping, which is a newly developed product of our company.
Note: The above parameters are for reference only. Please focus on the real equipment in detail!
Recommended informationNEWS
- [2022-08-26]How to use the universal tensile testing machine?
- [2022-08-26]What are the key points of the lateral deformation test of electronic universal testing machines?
- [2022-08-12]Testing method of metal rods by testing machine
- [2022-08-12]Electronic universal testing machine-Plastic film tensile testing machine
- [2022-08-12]Functional uses and applicable areas of tension testing machine
- [2022-08-04]How to install a clamp to save effort
- [2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
- [2022-08-04]What are the calibration methods for electronic tensile testing machines?
- [2022-08-04]Tension machine
- [2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
- [2022-07-29]In practical applications, friction between parts is inevitable.
- [2022-07-29]Methods to avoid positioning errors of electronic universal test machines
- [2022-07-29]What errors are prone to occur when using the fatigue test machine
- [2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
- [2022-07-20]What are the safety and service life of the woven bag tensile tester?
- [2022-07-20]Several categories of tension machine sensors
- [2022-07-20]Calibration of universal testing machine sensor
- [2022-07-20]Introduction to technical problems of material tensile testing machine