Current location：front page >> Product Center >> Electronic universal testing machine series

Digital electronic universal testing machine (0.05-10KN)

Product Classification： Electronic universal testing machine series

Product Overview：It is suitable for testing the mechanical properties of metal and non-metallic materials such as tensile, compression, bending, shear, tear, peeling, and puncture. It can also conduct automatic control tests for constant-speed loading, constant-speed deformation, and constant-speed displacement, and has the functions of low-circuit load cycle, deformation cycle and displacement cycle. Find indicat

Digital electronic universal testing machine (0.05-10KN)

Functional uses

The synchronization belt and ball screw transmission, electronic measurement, digital display, continuous adjustment of test speed, and automatic shutdown of the sample break. The test force, displacement amount, test status, etc. are displayed in real time, and the test force and displacement peak value can be maintained.

This machine is widely used in the mechanical properties test of non-metallic materials such as rubber, plastic, wires and cables, textiles, waterproof materials, non-woven fabrics, as well as metal wires, metal foils, metal plates and metal rods, and can also be tested for mechanical properties of other parts. Added accessories and can also perform compression and bending tests

Technical parameters

Product Name	Digital ExplanationElectronic universal testing machine
Product model	WDW-02S	WDW-05S	WDW-1S	WDW-2S	WDW-5S
Structural form	Single-arm structure
Testing force (N)	200	500	1000	2000	5000
Testing force level	Level 1
Test force measurement range	2%--100%FS
Relative error of test force display value	≤±1% of the displayed value
Force resolution	1/50000
Displacement measurement device	Optoelectronic encoder
Relative error of displacement display value	≤±1% of the displayed value
Displacement resolution (mm)	0.01
Displacement rate adjustment range (mm/min)	1-500 Wuji speed adjustment
Safety protection device	Mechanical limit protection and software overload protection
Effective stretching space (mm)	800
Stretch clamp	Select according to the material
Host size (mm)	420×280×1580
Host power supply	0.3KW/AC220V±10%
Host weight (KG)	150

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Previous article：Electro-hydraulic anti-flexural compression tester (300KN)
Next article：Digital pressure testing machine (2000KN manual lead screw)

Recommended informationNEWS

[2022-08-26]What are the key points of the lateral deformation test of electronic universal testing machines?
[2022-08-12]Testing method of metal rods by testing machine
[2022-08-12]Electronic universal testing machine-Plastic film tensile testing machine
[2022-08-12]Functional uses and applicable areas of tension testing machine
[2022-08-04]How to install a clamp to save effort
[2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
[2022-08-04]What are the calibration methods for electronic tensile testing machines?
[2022-08-04]Tension machine
[2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
[2022-07-29]In practical applications, friction between parts is inevitable.
[2022-07-29]Methods to avoid positioning errors of electronic universal test machines
[2022-07-29]What errors are prone to occur when using the fatigue test machine
[2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
[2022-07-20]What are the safety and service life of the woven bag tensile tester?
[2022-07-20]Several categories of tension machine sensors
[2022-07-20]Calibration of universal testing machine sensor
[2022-07-20]Introduction to technical problems of material tensile testing machine
[2022-07-15]Handling of displacement system failure of tensile test machine