Current location：front page >> Product Center >> Non-metallic material testing equipment

Piece punching machine

Product Classification： Non-metallic material testing equipment

Product Overview：This series of punching sheets is prepared by punching the test splines for plastic sheets, sheets and plastic films. The machine is simple in structure and convenient in operation. Splines that meet GB13022, GB/T528, GB/T529, GB/T1040 standards can be prepared.

Piece punching machine

Functional uses

Product Description:

XJC series punching sheets are prepared by punching the test splines for plastic sheets, sheets and plastic films. The machine is simple in structure and convenient in operation. Splines that meet GB13022, GB/T528, GB/T529, GB/T1040 standards can be prepared.

Technical parameters

l Cutting: 20kN, 50kN

l Progress: 55mm

lThickness of punching: <2mm

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Previous article：Digital waterproof coil tensioner
Next article：Dumbbell prototype

Recommended informationNEWS

[2023-07-03]Ring chain horizontal tensile testing machine
[2023-07-03]Chain tensile testing machine
[2023-07-03]Projects that can be tested by electronic tensile testing machines
[2023-02-23]Metal impact tester
[2023-02-16]Things to note when operating the electronic universal testing machine software
[2023-02-16]Impact testing machine Pendulum impact testing machine selection
[2022-11-30]What should be paid attention to when operating the electro-hydraulic servo universal test machine?
[2022-11-30]Electronic tensile testing machine
[2022-11-30]What is the maintenance of the impact test machine?
[2022-11-04]Standard impact test method for metal material notch specimens
[2022-11-04]1000KN digital display manhole cover pressure tester
[2022-11-04]Rubber material tensile testing machine
[2022-10-27]What should be paid attention to when installing fixtures in tensile testing machine
[2022-10-27]Maintenance method of friction and wear tester
[2022-10-21]Electronic universal material testing machine is used for wire tension testing, what is the jaw breakage
[2022-10-21]We need to check this problem when there is this problem with the rubber tensile tester
[2022-10-21]Let me tell you about the operating procedures of the impact test low temperature tank
[2022-10-21]Let me tell you about the installation requirements of the electro-hydraulic servo universal test machine