XNR-400A Melt Flow Rate Determination Device

Function:It is used to determine the melt flow rate of polymers such as polyethylene, polypropylene, polyformaldehyde, ABS resin, polycarbonate, nylon fluoroplastics at high temperatures. It is an ideal testing and teaching instrument for plastic raw materials and plastic products manufacturers, as well as quality inspection supervision and inspection institutes and colleges.

The new generation of artificial intelligence instrument temperature control and dual-bit time relay output control are adopted. The instrument has a short constant temperature cycle and extremely small overshoot. The temperature control part uses a molded temperature control unit table to effectively ensure the temperature control accuracy and product stability. For user convenience, this type of instrument cuts manually (the cutting interval and cutting time can be set arbitrarily). This model product is intelligent and has a very high degree of automation, with a wide range of application, fast heating speed, high product accuracy, stable and reliable performance.

Measurement range: 0.1-400.00g/10min (MFR)

Temperature range: room temperature -450℃

Temperature control accuracy: ±0.2℃

Timing accuracy: 1S or 0.01S

Timing range: 1-9999S or 0.01-99.99S

Load: Full load

Cutting method: manual Inner diameter of the barrel: 9.550mm±0.025mm

Bucket length: 160mm

Mould: material is tungsten carbide, length: 8.000mm±0.025mm Inner diameter: 2.095mm±0.005mm

Power: 0.45KW

Power supply: AC220V, 50Hz

Instrument size: 400mm×500mm×600mm

Instrument 60Kg

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Label:Universal testing machine,Hydraulic universal testing machine,Tension tester,ImpactTesting machine, twisting test machine, Material Testing Machine