Current location：front page >> Product Center >> Bending test machine series >> Rebar bending test machine series

GW-40Y reinforced bar bending test machine

Product Classification： Rebar bending test machine series

Product Overview：This reinforcement bending test machine is developed in accordance with the provisions of the national standard "Metal Bending Test Methods" (GB232-88). It can bend steel bars below HRB400 and below φ40. Its structural performance fully complies with the requirements of the test specifications. It has two supporting rollers, the spacing between the supporting rollers is adjustable, and curved cent

GW-40Y reinforced bar bending test machine

This reinforcement bending test machine is developed in accordance with the provisions of the national standard "Metal Bending Test Methods" (GB232-88). It can bend steel bars below HRB400 and below φ40. Its structural performance fully complies with the requirements of the test specifications. It has two supporting rollers, the spacing between the supporting rollers is adjustable, and curved centers of different diameters can be optionally equipped. The diameter of the curved center is stipulated by relevant standards. The instrument works reliably and is easy to operate.

Main technical parameters:

Specification	GW-40Y
Bending diameter	Φ40mm
Bending angle	Direct bend 0-180°
Oil pump working pressure	30Mpa
Piston rising speed	V1=80mm/min
Piston drop speed	V2=160mm/min

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Previous article：HJY-1000B digital explicit manhole cover pressure tester
Next article：BS3B microcomputer multi-element analyzer

Recommended informationNEWS

[2022-08-26]What are the key points of the lateral deformation test of electronic universal testing machines?
[2022-08-12]Testing method of metal rods by testing machine
[2022-08-12]Electronic universal testing machine-Plastic film tensile testing machine
[2022-08-04]How to install a clamp to save effort
[2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
[2022-08-04]Tension machine
[2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
[2022-07-29]In practical applications, friction between parts is inevitable.
[2022-07-29]Methods to avoid positioning errors of electronic universal test machines
[2022-07-29]What errors are prone to occur when using the fatigue test machine
[2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
[2022-07-20]What are the safety and service life of the woven bag tensile tester?
[2022-07-20]Several categories of tension machine sensors
[2022-07-20]Calibration of universal testing machine sensor
[2022-07-20]Introduction to technical problems of material tensile testing machine
[2022-07-15]Handling of displacement system failure of tensile test machine
[2022-07-15]Low temperature impact tester
[2022-07-15]How to choose a horizontal tensile tester and what to note during experiments