Functional characteristics and operating skills of horizontal testing machine

The horizontal tensile tester is used to connect and combine devices in the power system to transmit mechanical loads, electrical loads and protective functions. Most of the metal tools need to withstand a large tension during operation, and some also need to ensure good electrical contact. It is related to the safety of the wire or pole tower. Even if one is damaged, it may cause line failure. Let me introduce the functional characteristics and operating skills of the horizontal test machine.

1. Functional characteristics of horizontal testing machine

1. Fully automatic control: The high-performance speed control system enables the test machine to achieve full digital and automatic control;

2. According to the complete storage function, historical data can be reproduced and graphic display;

3. The computer screen completes the integrated data control display and test curve display functions;

4. Curve comparison: Various characteristic curves such as force-elongation, elongation-time in material tests can be drawn, and any section can be partially amplified and analyzed;

5. Safety protection: The sample is broken, overloaded, and the overcurrent tester is automatically protected and shut down;

6. Multiple functions: It can conduct various tests such as tensile, compression, bending, shear, tearing, peeling, etc. in normal temperature or high and low temperature environments, and can prepare and print test reports according to the user's requirements format.

7. The entire frame adopts a steel plate welded frame structure, and the main system structure is formed through front and rear chuck seats, oil cylinders and front cross beams;

2. Operation skills of horizontal testing machine

1. Incremental and direction adjustment buttons:

Click Operation: Control speed increases or decreases in increments of one, and can be used for accurate adjustments.

Press and hold operation: Control the speed of the tension test machine to increase or decrease continuously with an increment of one change.

2. Adjustment of speed adjustment roll bar:

Drag operation - can quickly and widely change the control speed.

3. Blank areas on both sides of horizontal tensile testing machine:

When clicking the operation: the speed increases or decreases in increments of 10.

When pressing and holding operation: the speed increases or decreases continuously with 10 increments, and is applied to faster adjustments.

After understanding the functional characteristics and operating skills of the horizontal test machine, the operator must use it in accordance with the procedures and specifications of the instructions when using the test machine. Otherwise, it is easy to cause dangerous situations such as machine failure and personnel injury. If you have any questions during use, you can call our service hotline through the web page, and our technicians will answer them one by one. Welcome to call and support!