Detailed explanation of the cleaning process of tensile testing machine

Jinan Hengsi Shanda Instrument Co., Ltd.Tension testerThe manufacturer reminds users through the official website to clean the tensile test machine:

The hydraulic valve of the hydraulic system of the tensile tester should be cleaned every 3 months and the hydraulic cylinder should be cleaned every 1 year. The seal should be replaced while cleaning, and the main technical parameters of the tensile tester should be retested after assembly, and the use requirements must be met.

Tension testerThe fuel tank also needs to be cleaned regularly. When the hydraulic system is working, part of the dirt accumulated along with the flow is at the bottom of the oil tank. If it is removed from time to time, the accumulation will increase and sometimes it will be sucked into the system by the hydraulic pump, causing the hydraulic system of the tensile tester to fail, affecting the detection accuracy. It is particularly important to note that when replacing the oil, the interior of the tension test engine oil tank must be cleaned, usually every four to six months.