Precautions for plastic electronic universal testing machine

plasticElectronic universal testing machineNotes:
1. Do not click the "Run" Experiment button if the experiment is not enabled.
2. After clamping the sample, do not "zero" the load value.
3. When clamping the extensometer, be careful to unplug the positioning pin and then adjust the zeroing; when removing the extensometer, be careful to insert the positioning pin to avoid damage to the extensometer due to artificial overload.
4. After the sample is broken, if the program does not exit the experimental state and prompts that the experiment is completed, you must immediately click the abort button to exit the experimental state.
5. After the test, there is no need to return to the position automatically.
6. After completing the experiment, you should first use WINDOWS to shut down the power supply before shutting down; turn off the oil pump and let the oil cylinder fall to the bottom.
7. Be careful not to loosen the plug when moving the computer
Uses of plastic electronic universal testing machine:
Plastic electronic universal testing machine can test rubber, plastic, foaming materials, plastic, film, flexible packaging, pipes, textiles, fibers, nanomaterials, polymer materials, composite materials, synthetic materials, packaging tapes, paper, wires, cables, optical fiber cables, wires, cables, safety belts, leather belts, footwear, adhesive tapes, polymers, copper materials, spring steel, metal wires, stainless steel, castings, copper tubes, non-ferrous metals, automotive parts, alloy materials and other non-metallic materials and metal materials for tensile, compression, bending, tearing, 90° peeling, 180° peeling, shearing, adhesion, pulling force, elongation, etc.

http://www.hssdtest.com/