9-step installation of vibration test machine

Vibration test machineThe same principle as ordinary test machines. The following is the specific operation steps of Jinan Hengsi Shanda Instrument Co., Ltd. for vibration test machines:

1. First fix the four foot bases of the table body to be placed.

2. If you want to fix it on the workbench and make a work table with angle steel, the tabletop requires level.

3. Connect the input line of the vibration table to the output hole of the control box.

①The height of the pedestal body is 15M and vertically ②The height of the pedestal body is 25M and horizontally

4. Connect the control box power supply 220∨/50HZ

5. Turn on the power switch, select the waveform as full wave, and select the vibration direction (vertical).

6. Follow "2. Setting Steps" to enter the parameter setting.

7. Press "3. Frequency Operation Instructions" to adjust the functions such as single group or frequency sweeping.

8. Fine-tuning the magnitude of the magnitude is fixed in the middle position. Follow "VI. Amplitude Modulation Control Instructions" to adjust the amplitude.

9. Press RUN to start the vibration test.

MoreMaterial testing machineAll information is in Jinan Hengsi Shanda Instrument Co., Ltd.