Current location：front page >> Product Center >> Impact testing machine series >> Drop hammer impact tester

LC-2 hammer impact tester

Product Classification： Drop hammer impact tester

Product Overview：The drop hammer impact tester is suitable for the determination of impact toughness of various pipes (such as water supply pipes, drainage pipes, low-pressure water supply pipes, core foam pipes, polypropylene (PP) pipes, plastic pipes for communication pipelines, etc.), and can also be used for hard plastic sheets. The product meets the technical conditions of the industry standard

LC-2 hammer impact tester

The hammer impact tester is suitable for various pipes (such as water supply pipes, drainage pipes, low-pressure water supply pipes, core foam pipes, polypropylene (PP) The measurement of impact toughness of pipes, plastic pipes for communication pipelines, etc.) can also be used for hard plastic sheets.Products comply with industry standards JB/T9389Technical conditions of the falling hammer impact test machine, meet GB/T5836.1, GB/T10002.3, GB/T16800, GB6112, ISO4422Standard requirements for testing methods.

Technical requirements

Hammer weight: 0.25kg-15kg

Hammer head curvature radius: R5, 10, 12.5, 30, 50, 120wait

Impact height: 100--2000mm

Specifications of test pieces:ф10-ф400mmф10-ф1000mm

Technical parameters:

Hammer weight: 0.25kg--16kg

Curvature radius of hammer: R5, 10, 12.5, 30, 50, 120etc

Impact height: 100--2000mm

Sample size:ф10-ф400mmф10-ф1000mm

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Previous article：LC-2 hammer impact tester
Next article：GBW-60S

Recommended informationNEWS

[2022-08-12]Testing method of metal rods by testing machine
[2022-08-12]Electronic universal testing machine-Plastic film tensile testing machine
[2022-08-04]How to install a clamp to save effort
[2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
[2022-08-04]Tension machine
[2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
[2022-07-29]In practical applications, friction between parts is inevitable.
[2022-07-29]Methods to avoid positioning errors of electronic universal test machines
[2022-07-29]What errors are prone to occur when using the fatigue test machine
[2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
[2022-07-20]What are the safety and service life of the woven bag tensile tester?
[2022-07-20]Several categories of tension machine sensors
[2022-07-20]Calibration of universal testing machine sensor
[2022-07-20]Introduction to technical problems of material tensile testing machine
[2022-07-15]Handling of displacement system failure of tensile test machine
[2022-07-15]Low temperature impact tester
[2022-07-15]How to choose a horizontal tensile tester and what to note during experiments
[2022-07-13]Tips for using universal testing machine