Introduction to the functions of tensile testing machine equipment tools

Tension testerAs a high-performance testing equipment, the various components of the instruments and equipment are inspected very frequently. The following is an introduction to the three components of the screwdriver, hand scissors, and hand reamers in the general assembly tools of the tensile testing machine:

A. Screwdriver ------ Screwdriver is mainly used for tightening or looseningTension testerScrews with grooves on the upper head. The width and thickness of the screw cutter edge must be consistent with the length and width of the screw head groove. Otherwise, there will be situations such as screwdriver edge or nail groove failure. Always maintain a certain pressure during use to prevent slipping and dissipation.

B. Hand scissors ------ Hand scissors are mainly used to cut thin plate parts of various materials on the shear tensile test machine, such as gaskets, springs, etc. Generally, scissors can be selected according to the shear shape, sheet material and thickness.

C. Hand reamer ------ The hand reamer is mainly used to giveTension testerThe components are reamed and burrs are removed to improve the accuracy and surface finish of the hole. When using a reamer with a hand, the speed should be low and the feed should be uniform. Be careful not to reverse the reamer.