Current location：front page >> Product Center >> Impact testing machine series >> Non-metallic material impact test machine

XJJ-50 series simple supporting beam impact test machine

Product Classification： Non-metallic material impact test machine

Product Overview：The main technical parameters of the XJJ-50 series simply supported beam impact tester are fully in line with ISO 179, GB/T 1043, GB/T 2612, JB/T 8762, and GB4742 standards. Replace different energy impact pendulums and adjust the jaw seat to perform various impact tests. This machine is a detection instrument with reasonable structure, beautiful shape, convenient operation and accurate data. It i

XJJ-50 series simple supporting beam impact test machine

Product Description:

XJJ-50 series simple support beamImpact testing machineThe main technical parameters are fully in line with ISO 179, GB/T 1043, GB/T 2612, JB/T 8762, and GB4742 standards. Replace different energy impact pendulums and adjust the jaw seat to perform various impact tests. This machine is a detection instrument with reasonable structure, beautiful shape, convenient operation and accurate data. It is widely used in hard plastics, fiberglass, reinforced nylon and other fields.

Technical parameters:

Pendulum energy: 7.5J, 15J, 25J, 50J (standard with a hammer)

Pendulum torque: 7.5J pendulum PL=3.866Nm 15J pendulum PL=7.733Nm

25J pendulum PL=12.889Nm 50J pendulum PL=25.777Nm

Small index value of the scale disc: 1/100

Impact speed: 3.8m/s

Pendulum angle: 160°

Distance from the center of the pendulum to the center of the sample: 380mm

Claw radius: R=1±0.1mm

Blade rounded corner radius: R=2±0.5mm

Angle of impact blade: 30±l°

Distance between jaw support lines: 40mm, 60mm, 70mm, 95mm

Pendulum air impact energy loss: 0.5%

Sample Type	Length C	Width B	Thickness D	Scope
I	80	10	4	60
II	50	6	4	40
III	120	15	10	70
IV	125	13	13	95

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Previous article：XJJ-5 simple supporting beam impact test machine
Next article：Digitally explicit simple-supported beam impact test machine

Recommended informationNEWS

[2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
[2022-07-29]In practical applications, friction between parts is inevitable.
[2022-07-29]Methods to avoid positioning errors of electronic universal test machines
[2022-07-29]What errors are prone to occur when using the fatigue test machine
[2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
[2022-07-20]What are the safety and service life of the woven bag tensile tester?
[2022-07-20]Several categories of tension machine sensors
[2022-07-20]Calibration of universal testing machine sensor
[2022-07-20]Introduction to technical problems of material tensile testing machine
[2022-07-15]Handling of displacement system failure of tensile test machine
[2022-07-15]Low temperature impact tester
[2022-07-15]How to choose a horizontal tensile tester and what to note during experiments
[2022-07-13]Tips for using universal testing machine
[2022-07-13]About how to choose a high-precision material testing machine
[2022-07-08]Impact sample notch hydraulic pulling bed (US standard)
[2022-07-08]Wide application and precautions for stripping test machines
[2022-07-08]Common problems and solutions during the use of universal thermal insulation test machine
[2022-07-08]Test method for rock wool shear strength