Current location：front page >> Product Center >> Bending test machine series >> Wire bending test machine series

Electric wire repeat bending test machine

Product Classification： Wire bending test machine series

Product Overview：This test machine is mainly used for repeated bending tests of metal wires to test the properties of metal wires to withstand plastic deformation and the defects displayed during repeated bending. After being equipped with a plate clamping device, the bend test of the plate sample can also be carried out. Widely used in steel and construction industries, as well as wire rope manufacturers. Suitabl

Electric wire repeat bending test machine

1. Main uses and scope of application

This test machine is mainly used for repeated bending tests of metal wires to test the properties of metal wires to withstand plastic deformation and the defects displayed during repeated bending. After being equipped with a plate clamping device, the bend test of the plate sample can also be carried out.

This machine is widely used in the steel and construction industry, as well as the production and use manufacturers of wire ropes, wires and cables.

Suitable for φ1-φ10 metal wire, equipped with special fixtures, and can also perform metal bending tests of other specifications.

2. Main technical parameters

Serial number	Project name	unit	parameter
1	Sample diameter	mm	φ1-φ10
2	Sample length	mm	150-200
3	Bending angle	Spend	±90°
4	Bending speed	Times/minute	< 60
5	Number range	Second-rate	0-9999
6	Motor power	Kw	1.1
7	Appearance size	mm	1000600330
8	Test machine weight	Kg	About 210

3. Working conditions

1. At room temperature 10-35℃;

2. On a stable basis, place horizontally;

3. In a vibration-free environment;

4. No corrosive substances around;

5. No obvious electromagnetic interference;

6. The fluctuation range of the power supply voltage shall not exceed ±10 of the rated voltage of 380V;

7. There should be a certain amount of spare space around the test machine.

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Previous article：Manual wire repeat bending test machine
Next article：Steel pipe bending test machine GGW-50

Recommended informationNEWS

[2022-09-09]Basic functions of terminal tension testing machine
[2022-09-09]Operation method and characteristics of cup protrusion test machine
[2022-09-09]Tear test of various samples by electronic universal testing machine
[2022-09-09]How to choose the internal structure of the tensile tester
[2022-09-02]Daily maintenance of test machines
[2022-09-02]Research and development trends of spring test machines
[2022-09-02]Working principle of anchor chain tension testing machine
[2022-08-26]Advantages of universal tensile testing machine
[2022-08-26]Do you know how important the configuration of the universal tensile test machine is? The configuration of the universal tensile test machine
[2022-08-26]Introduction to the functions of the repeated bending test machine of metal material
[2022-08-26]How to use the universal tensile testing machine?
[2022-08-26]What are the key points of the lateral deformation test of electronic universal testing machines?
[2022-08-12]Testing method of metal rods by testing machine
[2022-08-12]Electronic universal testing machine-Plastic film tensile testing machine
[2022-08-04]How to install a clamp to save effort
[2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
[2022-08-04]Tension machine
[2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine