Current location：front page >> Product Center >> Impact testing machine series >> Non-metallic material impact test machine

Simple support beam impact test machine

Product Classification： Non-metallic material impact test machine

Product Overview：It is mainly suitable for the determination of impact toughness of hard plastics for various purpose pipes. It is also suitable for the determination of the impact toughness of hard plastic sheets and non-metallic materials such as nylon, fiberglass, ceramics, cast stone, electrically insulating materials. The machine fully complies with the requirements of ISO179, GB/T1043, GB/T2611, and JB/T8762

Simple support beam impact test machine

Functional uses

This machine is suitable for the determination of impact toughness of non-metallic materials such as plastic pipes, plates, profiles, engineering plastics, fiberglass, ceramics, castings, electrically insulating materials. The product complies with the standards and requirements of ISO179, ISO180, GB/T1043, GB/T1843, GB/T13525, etc.

Technical parameters

Technical parameters:

Product Name

Dish type simple supporting beam impact test machine

Product model

XJJ-5

XJJ-50

Shock Energy (J)

1, 2, 4, 5

7.5, 15, 25, 50

Shock speed

2.9m/s

3.8m/s

Display method

Dial hand

Pendulum elevation angle

150°

Performance metrics:

Dial pointer dial index value: 1/220 of impact energy; the dial is divided into fixed dials and rotatable digital dials. The outer layer on the dial is angled, the middle layer is a simple-supported beam scale, and the inner layer is a cantilever beam scale.

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Previous article：Digital pressure testing machine (2000KN manual lead screw)
Next article：Cantilever beam impact test machine

Recommended informationNEWS

[2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
[2022-07-29]In practical applications, friction between parts is inevitable.
[2022-07-29]Methods to avoid positioning errors of electronic universal test machines
[2022-07-29]What errors are prone to occur when using the fatigue test machine
[2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
[2022-07-20]What are the safety and service life of the woven bag tensile tester?
[2022-07-20]Several categories of tension machine sensors
[2022-07-20]Calibration of universal testing machine sensor
[2022-07-20]Introduction to technical problems of material tensile testing machine
[2022-07-15]Handling of displacement system failure of tensile test machine
[2022-07-15]Low temperature impact tester
[2022-07-15]How to choose a horizontal tensile tester and what to note during experiments
[2022-07-13]Tips for using universal testing machine
[2022-07-13]About how to choose a high-precision material testing machine
[2022-07-08]Impact sample notch hydraulic pulling bed (US standard)
[2022-07-08]Wide application and precautions for stripping test machines
[2022-07-08]Common problems and solutions during the use of universal thermal insulation test machine
[2022-07-08]Test method for rock wool shear strength