Current location：front page >> Product Center >> Impact testing machine series >> Non-metallic material impact test machine

Cantilever beam impact test machine

Product Classification： Non-metallic material impact test machine

Product Overview：The main technical parameters of this series of cantilever beam impact test machines are fully in line with the standards of IS0 180, GB/T 1843, GB/T 2611, JB/T 8761, etc., and are suitable for the determination of impact toughness of non-metallic materials such as hard plastics, reinforced nylon, fiberglass, ceramics, cast stones, electrically insulating materials. This machine is a detection ins

Cantilever beam impact test machine

Functional uses

This machine is suitable for the determination of impact toughness of non-metallic materials such as plastic pipes, plates, profiles, engineering plastics, fiberglass, ceramics, castings, electrically insulating materials. The product complies with the standards and requirements of ISO179, ISO180, GB/T1043, GB/T1843, GB/T13525, etc.

Technical parameters

Product Name
Cantilever beam impact test machine

Product model

XJU-5.5

XJU-22

XJUD-5.5

XJUD-22

Shock Energy (J)

1, 2.75, 5.5

11, 22

1, 2.75, 5.5

11, 22

Shock speed

3.5m/s

Display method

Dial hand

Digital Explanation

Pendulum elevation angle

150°

Performance metrics:

Dial pointer dial index value: 1/220 of impact energy; the dial is divided into fixed dials and rotatable digital dials. The outer layer on the dial is angled, the middle layer is a simple-supported beam scale, and the inner layer is a cantilever beam scale.
The digital display impact machine has the functions of angle measurement and zeroing, energy loss measurement and automatic compensation, automatic calculation of impact strength, standard deviation and other functions.
The cantilever beam jaws adopt wedge-shaped self-clip jaws, easy to clamp and quick clamping, which is a newly developed product of our company.

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Previous article：Simple support beam impact test machine
Next article：Microcomputer-controlled constant stress pressure tester (2000KN/3000KN)

Recommended informationNEWS

[2023-02-16]Things to note when operating the electronic universal testing machine software
[2023-02-16]Impact testing machine Pendulum impact testing machine selection
[2022-11-30]What should be paid attention to when operating the electro-hydraulic servo universal test machine?
[2022-11-30]Electronic tensile testing machine
[2022-11-30]What is the maintenance of the impact test machine?
[2022-11-04]Standard impact test method for metal material notch specimens
[2022-11-04]1000KN digital display manhole cover pressure tester
[2022-11-04]Rubber material tensile testing machine
[2022-10-27]What should be paid attention to when installing fixtures in tensile testing machine
[2022-10-27]Maintenance method of friction and wear tester
[2022-10-21]Electronic universal material testing machine is used for wire tension testing, what is the jaw breakage
[2022-10-21]We need to check this problem when there is this problem with the rubber tensile tester
[2022-10-21]Let me tell you about the operating procedures of the impact test low temperature tank
[2022-10-21]Let me tell you about the installation requirements of the electro-hydraulic servo universal test machine
[2022-10-21]Methods for daily maintenance of fatigue testing machines
[2022-10-14]Basic knowledge and performance inspection of carbon fiber cloth
[2022-10-14]Basic knowledge and performance inspection of rebar
[2022-10-14]Daily maintenance and maintenance of electronic universal testing machines