Current location：front page >> Product Center >> Non-metallic material testing equipment

Notched prototype

Product Classification： Non-metallic material testing equipment

Product Overview：This product is mainly used to prepare sample notches for impact tests of cantilever beams and simply supported beams. The gaps in the samples prepared by this prototype are fully in line with the provisions of the standards of IS0179, IS0180, GB/T1043, and GB/T1843, and the gap depth is controlled by a micrometer. This product has the characteristics of simple structure, convenient operation and

Notched prototype

This product is mainly used to prepare sample notches for impact tests of cantilever beams and simply supported beams. The gaps in the samples prepared by this prototype are fully in line with the provisions of the standards of IS0179, IS0180, GB/T1043, and GB/T1843, and the gap depth is controlled by a micrometer. This product has the characteristics of simple structure, convenient operation and high accuracy. It is widely used in the chemical industry, scientific research institutions, colleges and universities, and quality inspection departments.

Technical parameters:

1. Tool stroke: 24mm

2. Inlet speed: speed is 4mm/min

3. Feeding capacity: 0.5mm/stroke

4. Feed stroke: 10mm

5. Sample type. Type I, Type II, Type III, Type IV

6. Notch type: Type A, Type B, Type C

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Previous article：Microcomputer-controlled constant stress cement flexural and compressive tester (300KN)
Next article：YAW-300B fully automatic pressure tester

Recommended informationNEWS

[2022-11-04]Rubber material tensile testing machine
[2022-10-27]What should be paid attention to when installing fixtures in tensile testing machine
[2022-10-27]Maintenance method of friction and wear tester
[2022-10-21]Electronic universal material testing machine is used for wire tension testing, what is the jaw breakage
[2022-10-21]We need to check this problem when there is this problem with the rubber tensile tester
[2022-10-21]Let me tell you about the operating procedures of the impact test low temperature tank
[2022-10-21]Let me tell you about the installation requirements of the electro-hydraulic servo universal test machine
[2022-10-21]Methods for daily maintenance of fatigue testing machines
[2022-10-14]Basic knowledge and performance inspection of carbon fiber cloth
[2022-10-14]Basic knowledge and performance inspection of rebar
[2022-10-14]Daily maintenance and maintenance of electronic universal testing machines
[2022-09-30]Classification and performance differences of material testing machines
[2022-09-28]What issues should be paid attention to when maintaining a hydraulic universal testing machine?
[2022-09-28]What should be noted when using the repetitive bending test machine for steel bars?
[2022-09-28]Main uses and daily maintenance of spring tester
[2022-09-28]How should the pressure tester be operated and calibrated
[2022-09-22]How should the pressure tester be operated and calibrated
[2022-09-09]Performance characteristics of insulator horizontal tensile testing machine