Current location：front page >> Product Center >> Non-metallic material testing equipment

Piece punching machine

Product Classification： Non-metallic material testing equipment

Product Overview：This series of punching sheets is prepared by punching the test splines for plastic sheets, sheets and plastic films. The machine is simple in structure and convenient in operation. Splines that meet GB13022, GB/T528, GB/T529, GB/T1040 standards can be prepared.

Piece punching machine

Functional uses
Product Description:

XJC series punching sheets are prepared by punching the test splines for plastic sheets, sheets and plastic films. The machine is simple in structure and convenient in operation. Splines that meet GB13022, GB/T528, GB/T529, GB/T1040 standards can be prepared.

Technical parameters
l Cutting: 20kN, 50kN

l Progress: 55mm

lThickness of punching: <2mm

(The above parameters are for reference only, and the detailed parameters are mainly real equipment)

Previous article：YAW-300B fully automatic pressure tester
Next article：Repeated bending test machine for steel bars

Recommended informationNEWS

[2022-08-12]Functional uses and applicable areas of tension testing machine
[2022-08-04]How to install a clamp to save effort
[2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
[2022-08-04]What are the calibration methods for electronic tensile testing machines?
[2022-08-04]Tension machine
[2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
[2022-07-29]In practical applications, friction between parts is inevitable.
[2022-07-29]Methods to avoid positioning errors of electronic universal test machines
[2022-07-29]What errors are prone to occur when using the fatigue test machine
[2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
[2022-07-20]What are the safety and service life of the woven bag tensile tester?
[2022-07-20]Several categories of tension machine sensors
[2022-07-20]Calibration of universal testing machine sensor
[2022-07-20]Introduction to technical problems of material tensile testing machine
[2022-07-15]Handling of displacement system failure of tensile test machine
[2022-07-15]Low temperature impact tester
[2022-07-15]How to choose a horizontal tensile tester and what to note during experiments
[2022-07-13]Tips for using universal testing machine