Current location:front page >> Product Center >> Bending test machine series >> Rebar bending test machine series
Repeated bending test machine for steel bars

Repeated bending test machine for steel bars
Product Classification: Rebar bending test machine series
Product Overview:This machine is a special equipment for conducting flat front and reverse bending tests of steel bars. The main technical parameters and indicators of this equipment meet the requirements of the GB5029-85 steel bar plane reverse bending test method. This product is widely used in steel factories and construction units to test the positive and reverse bending performance of rebars. The GW-40B type

This test machine is a process equipment for cold bending tests and plane reverse bending tests on steel bars. Its main parameters comply with the relevant provisions in GB/T1499.2-2007 "Steel for Reinforced Concrete Part 2: Hot Rolled Ribbed Reinforced Bars" and YB/T5126-2003 "Test Methods for Bending and Reverse Bending of Reinforced Concrete". It can be widely used in enterprises such as steel metallurgy, steel frame structure, prefabricated components, construction materials, steel bar production, and quality supervision institutes, engineering quality inspection stations, scientific research institutes, colleges and universities. It is an ideal test equipment indispensable for inspecting the cold bending and reverse bending performance of threaded steel bars.
The test machine is composed of a frame, a workbench, a working plate, a reducer, a compression device, an electrical control box, a safety shield and a bending accessories. It has the characteristics of compact structure, simple operation, large load-bearing capacity, stable operation, low noise, and intuitive bending angle display, safe and reliable, and easy maintenance. In order to ensure the safety of operators and equipment, the test machine is also equipped with a reliable limiting mechanism, and the equipment can be stopped in time when the electrical control part is out of control or operated.
Technical parameters
(The above parameters are for reference only, and the detailed parameters are mainly real equipment)
Model specifications
|
GW-40B
|
GW-50B
|
Test diameter
|
φ40mm
|
φ50mm
|
Forward bending angle
|
Any settings within 0-180°
|
|
Reverse bending angle
|
Any settings within 0-25°
|
|
Working disc speed
|
≤20°/s
|
|
Roller center distance
|
165mm
|
165mm
|
Working disk diameter
|
φ580mm
|
φ760mm
|
Support arm adjustment method
|
Electric adjustment
|
|
Rebar bent accessories
|
HRB-335/φ6-φ40/or optional
|
HRB-335/φ6-φ50/or optional
|
Motor power
|
1.5kw
|
2.2kw
|
Machine appearance
|
1200×900×1188mm
|
1700×1170×1150mm
|
Machine weight
|
1500kg
|
2500kg
|
(The above parameters are for reference only, and the detailed parameters are mainly real equipment)
- Previous article:Piece punching machine
- Next article:Digital Explicit Material Torsion Test Machine
Recommended informationNEWS
- [2022-10-21]We need to check this problem when there is this problem with the rubber tensile tester
- [2022-10-21]Let me tell you about the operating procedures of the impact test low temperature tank
- [2022-10-21]Let me tell you about the installation requirements of the electro-hydraulic servo universal test machine
- [2022-10-21]Methods for daily maintenance of fatigue testing machines
- [2022-10-14]Basic knowledge and performance inspection of carbon fiber cloth
- [2022-10-14]Basic knowledge and performance inspection of rebar
- [2022-10-14]Daily maintenance and maintenance of electronic universal testing machines
- [2022-09-30]Classification and performance differences of material testing machines
- [2022-09-28]What issues should be paid attention to when maintaining a hydraulic universal testing machine?
- [2022-09-28]What should be noted when using the repetitive bending test machine for steel bars?
- [2022-09-28]Main uses and daily maintenance of spring tester
- [2022-09-28]How should the pressure tester be operated and calibrated
- [2022-09-22]How should the pressure tester be operated and calibrated
- [2022-09-09]Performance characteristics of insulator horizontal tensile testing machine
- [2022-09-09]Basic functions of terminal tension testing machine
- [2022-09-09]Operation method and characteristics of cup protrusion test machine
- [2022-09-09]Tear test of various samples by electronic universal testing machine
- [2022-09-09]How to choose the internal structure of the tensile tester