Things to note when operating hydraulic universal testing machine, what should we pay attention to when operating hydraulic universal testing machine

Hydraulic universal testing machine is a commonly used material testing machine, which can be used for tensile, compression, bending, shearing, etc. of metals, non-metals, composite materials and products. During the use of hydraulic universal testing machine, if you pay attention to maintenance, it can not only prevent the occurrence of faults, but also extend the service life. Next, the editor will introduce to you the precautions for the operation of hydraulic universal testing machines.

1. The key parts of the test machine (such as jaws, gearbox, etc.) should be frequently filled with lubricating grease.

2. If not used for a long time, power should be turned on once a month.

3. Since the test machine is controlled by the microcomputer's control software, it should be ensured that the software is not closed when the test machine is turned on.

4. Software environment: Office2000 (Word2000, Access2000) must be installed.

5. The connection cables of the test machine and the computer host must be plugged in properly and there should be no false connections.

6. Regularly inspect and repair the hydraulic universal testing machine to ensure the normal operation of the testing machine.

The above is an introduction to the relevant precautions for the operation of hydraulic universal testing machines. I hope it will be helpful to everyone.