Current location：front page >> Product Center >> Impact testing machine series >> Impact testing machine
Manual impact tester (300J)
Manual impact tester (300J)
Product Classification： Impact testing machine
Product Overview：The JB-300 manual impact tester is mainly used to measure the performance of metal materials to resist impact under dynamic load state, thereby judging the quality status of the material under dynamic load. This test machine is suitable for ferrous metals with high impact toughness, such as the impact performance test of steel and alloy materials, and can be used for material laboratory in various
Main technical parameters
1. Impact energy: 300J (sledgehammer), 150J (small hammer)
2. Dial scale range and indexing value
Energy range: 0-300J 0-150J
Dividing value per small grid: 2J 1J
3. Impact speed: ≈5.0m/s
4. Pendulum pre-raising angle: 135°
5. Span of sample bearing: 40mm
6. Round corners of support jaws: R1.0～1.5mm
7. Impact blade rounded corner: R2.0～2.5mm
8. Swing rod length: 800mm
9. Standard sample size: 10×10×55mm
10. Dimensions: 1000×630×1520mm
11. Weight: 320Kg
(The above parameters are for reference only, and the detailed parameters are mainly real equipment)
- Previous article：Iron ore pellet pressure test machine
- Next article：Digital display semi-automatic impact test machine (300J, 500J)
Recommended informationNEWS
- [2022-08-04]What are the causes of oil leakage in the universal pressure test machine?
- [2022-08-04]Tension machine
- [2022-07-29]Staff must conduct necessary inspections on the different structures and parts of the fatigue testing machine
- [2022-07-29]In practical applications, friction between parts is inevitable.
- [2022-07-29]Methods to avoid positioning errors of electronic universal test machines
- [2022-07-29]What errors are prone to occur when using the fatigue test machine
- [2022-07-29]Performance characteristics of electronic universal testing machine and preparations before operation
- [2022-07-20]What are the safety and service life of the woven bag tensile tester?
- [2022-07-20]Several categories of tension machine sensors
- [2022-07-20]Calibration of universal testing machine sensor
- [2022-07-20]Introduction to technical problems of material tensile testing machine
- [2022-07-15]Handling of displacement system failure of tensile test machine
- [2022-07-15]Low temperature impact tester
- [2022-07-15]How to choose a horizontal tensile tester and what to note during experiments
- [2022-07-13]Tips for using universal testing machine
- [2022-07-13]About how to choose a high-precision material testing machine
- [2022-07-08]Impact sample notch hydraulic pulling bed (US standard)
- [2022-07-08]Wide application and precautions for stripping test machines